The thermal shock test box is a necessary test equipment for metal, plastic, rubber, electronics and other material industries, used to test material structure or composite materials, in an instant under the continuous environment of extremely high temperature and extremely low temperature to endure the degree of chemical changes or physical damage caused by thermal expansion and contraction of the sample in the shortest time. The cold and hot impact Test Chamber meets the test method: GB/T2423.1.2, GB/T10592-2008, GJB150.3 high and low temperature impact test.
Model | CJ2-80 | CJ2-100 | CJ2-150 | CJ2-225 | CJ2-512 | CJ2-800 | CJ2-010 | CJ2-015 |
System | Balanced Temperature Control System |
Temp.Range | -20℃~150℃;-40℃~150℃;-60℃~150℃ Rapid temperature nolinear (Linearly is option) |
Temp.fluctuation | ±0.5℃ |
Temperature Deviation | ±2.0℃ |
Pre Heat Temp.Range | 60℃~180℃ |
Pre Cool Temp.Range | -20℃~-70℃ |
Heat Up Time | Room temperature~150℃ about 35 minutes |
Pull Down Time | Room temperature~-70℃ about 50 minutes |
Switch Time | 8-10s |
Temp Recovery Time 恢复时间 recovery time | 5 minutes |
Switch Type | pneumatic |
Internal dimension | W | 400 | 400 | 500 | 500 | 800 | 1000 | 1000 | 1000 |
H | 500 | 500 | 600 | 750 | 800 | 1000 | 1000 | 1000 |
D | 400 | 500 | 500 | 600 | 800 | 800 | 1000 | 1500 |
External dimension | W | 2500 | 2500 | 2600 | 2650 | 3200 | 3500 | 3500 | 4200 |
H | 1800 | 1800 | 1900 | 1950 | 2100 | 2100 | 2100 | 2200 |
D | 1200 | 1500 | 1500 | 1700 | 2500 | 2800 | 3000 | 4000 |
Interior material | SUS#304 Stainless steel plate |
Exterior material | Backed painting steel or stainless steel(SUS304) |
Insulation material | Rigid polyurethane foam + glass fibre |
Refrigeration system | Air cooled or (Water cooled type is option) |
Single section/Cascade type,Hermetic/Semitight compressor,CFC free refrigerant |
Controller | Color LCD screen in English/Chinese.programing communicating function |
Safety Devices | No welding wire switch,compressor overheating and over current protection,over pemperature protection,blower overload protection,fault warning system |
Standard Accessories | one observation window,one floodlight,one indicator light,four moving wheels,2 meters of power cord,communication interface |
Ambient Temp. | 5℃~35℃ |
Power | AC380±10% 50HZ 3 phase 4wires+Groud wires |
Note: The above specifications are for reference only, the actual specifications are mainly quoted |